RC2 2.4Ghz Mini Remote Controller and Receiver for DIY Eboard

2.4Ghz Remote Controller RC2


Submit a wholesale Inquiry
7 reward points
Qty: Unit(s)
Qty Discounts Off Price

RC2 2.4Ghz Mini Remote Controller and Receiver for DIY Eboard

2.4Ghz Mini Remote Controller RC2 is a small handheld controller to power on your DIY Electric Skateboard.

  • 2.4G frequency Any ESC appplicable
  • DIY New arrival 2.4Ghz mini remote controller and receiver for electric skateboard
    Battery:Li-po 3.7v 500mAh
    Channel: 2 channels for low and high speed controlling
  • charging: USB
    Weight: 48g
    Frequency: 2.4Ghz frequency Any ESC appplicable
  • Channel: 2 channels
    Application of ESC: All ESC
    Color: Black
    Power:Li-po 3.7v 500mAh(included)
    Wrist strap
    Suitable for : Electric skateboard longboard
    USB Charge spot (USB line do not inclueded,as it is suitable for normal USB line)
    Note:No retail box.

  • How to bind the transmitter to the receiver? 
    1).Check and make sure all the wires are mounted,and the remote is CLOSED,insert the bind plug into CH3(Bind) on the receiver;
    2).Switch on the ESC,you can see the receiver red light flash; 3).Press and hold on the bind button on the remote and then turn the remote on;
    4).You should notice the transimitter go from flashing red to solid red,and also the solid red of the receiver;
    5).Once you see a solid red light, you now know the two are binded together,and please pull the bind plug out (this is important,so the remote can record the throttle mid to realize the fail safe)
    6).Then you can test it again by turning off the controller and it should flash.if you turn the power on Transmitter back on it should go back to solid red.
    Before running,it's better to test the fail safe fuction by closing the remote,if the motor didn't move,so the fail safe fuction is in good condition,when you find the motor is moving,you have to repeat the step No.1 to No.6 above 

  • Note: If no specific requirement, we will ship out non-brand no logo version

Read the Review
Date Added: 08/04/2017 by Simon
5 of 5 Stars!5 of 5 Stars!
Good quality. Tiny enough to fit into the palm of your hand and ergonomically comfortable.

Read the Review
Date Added: 08/03/2017 by Tristen B.
5 of 5 Stars!5 of 5 Stars!
I've only been using my controller for a short time but find it comfortable, easy to use and very re...

Read the Review
Date Added: 07/22/2017 by J. Kramer
5 of 5 Stars!5 of 5 Stars!
this seller has really tried to help me through everything and was really nice so Im going to give h...

DIYEboard's Return & Warranty Policy

DIYEboard, we want you to be completely satisfied with your purchase and we believe in the products which we sell.

All products sold by DIYEboard.com are inspected and tested before and after leaving the manufacturer. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Standard Return Policy

We accept returns or exchanges within 30 days of the original purchase date for cash value refunds.

The returned product must be in unused condition, in it’s original packaging with the original packing slip. A 20%+ restocking fee will be charged on all cash value returns and refunds dependent upon our discretion. Returned orders which received free shipping will be deducted from the original order price.

We cover return shipping on defective items only. The buyer is responsible for covering return shipping costs before a repair or replacement has been completed. All defective items are inspected by our technicians. If the item is not defective the return shipping costs will be charged to the buyer.

Orders that are refused or undelivered as addressed will be charged for any additional shipping fees. NO EXCEPTIONS.

To return or exchange a product, please email us at jason@volansboard.com. You’ll need to mention your order # within your email. A return will require an RMA #(Return Merchandise Authorization #) which you must write on the shipment back to us.

On Sale, Clearance, Boneyard, EPOWER Battery Packs, Electronic Products & Consumable items are not eligible for returns.

General Warranty

All products sold by DIYEboard.com are inspected and tested before and after leaving the factory. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Every complete electric skateboard automatically comes with a 6-month warranty against manufacturing defects.

Every Diyeboard kits, parts and components have a 90-day warranty.

Belts, bearings, wheels, hub motor PU sleeves, bearings, and grip tape are normal wear and tear items and are not covered under warranty. Any amount of water has the potential to damage the board, especially to esc and battery, and water damage is not covered under warranty. Any customization or alterations to the board, kit, mechanical parts, or electronics will void your warranty and likely cause the board or kit to be completely inoperable, so alter at your own risk.

Electronic components have a 60-day warranty. (Includes ESC, Remote, Battery, Battery Chargers, Motors, Hub Motors only).

If a component is defective and/or not correctly made, DIYEboard at it’s sole discretion, will repair, replace and/or pay the buyer for a replacement.

Warranties are non-transferable warranties.

If a component is defective and/or not correctly made, DIYEboard at its sole discretion, will repair, replace and/or pay the buyer for a replacement.

Typical use, normal wear and tear, crash, water damage, modifications, improper use and/or installation are not covered.

60 Day Warranty – Electronics

Electronic components have a 60-day warranty. (Includes Remote, Battery, Battery Chargers, Motors, Hub Motors only)

Most electrical products are tested before shipment and are deemed in working condition before shipment. Due to the nature of assembly and setup, we are not liable or responsible for certain improper installations made by the customer. If it is a practical repair, we are more than happy to assist with repairing, replacing or offering store credit at our discretion.

If the item has been damaged due to user neglect, accident and/or wear and tear the product is not eligible for warranty.

ESC has no warranty unless the additional warranty is purchased.

We do value our customers and under certain circumstances, we may discount a product due to user mistake, incorrect installation. We don’t leave you hanging!

Shipping For Returns

You will be responsible for paying for shipping costs to return the items to us. Shipping costs from your original order are non-refundable.

If you are shipping an item over $100 USD, you should consider an insured and trackable shipping option. We are not liable or accept responsibility for any lost packages which do not arrive at our shop.

Refunds (if applicable)

Returns and Refunds can take up to 4 weeks but typically are resolved much sooner. Once we receive your items, we will notify you if your request has been approved or denied.

If you are approved for a refund, your refund will then be processed through your original payment method within 2-3 business days.

Chargeback Policy

All fraudulent chargebacks are investigated and will be prosecuted to the fullest extent of the law.

Product Listing Disclaimer

Product Listings are updated as often as we can for the every item. Products are improved and upgraded quite frequently and photos may slightly vary. If the item is no longer available under our discretion we will offer a similar or upgraded product.

Acceptance Of This Policy

By purchasing from our website(http://www.diyeboard.com/), you agree to all the policies within our Return & Warranty Policy page.

Customer Videos: See all 0 videos
Customer Images: See all 0 images
Friday 13 May, 2016

This product was added to our catalog on Friday 13 May, 2016.

DIYEboard.com is your ultimate source for high quality and high performance complete electric skateboard and DIY parts. We carry a wide selection of electric skateboard motor mounts, electric skateboard sensored / sensorless brushless dc belt-drive motors, electric skateboard hub / in-wheel motors, electric skateboard mechanical kits, electric skateboard kits, electric skateboard remote controllers, esc speed controllers, electric skateboard batteries and much much more. DIYEboard.com can help and guide you build your own high performance Electric Skateboard using our lowest factory price Electric Skateboard Parts & Kits. Feel free to send us an email and we are more then happy to help you build your electric skateboard or electric longboard from start to finish.