Dual Belt Drive 1400W*2 N5055 Motor Power Truck&Front Truck Kit

Dual N5055 Power Truck 83*52mm

$268.00  $158.0041

Submit a wholesale Inquiry
32 reward points

Please Choose:


Qty: Unit(s)
Qty Discounts Off Price
* Discounts may vary based on options above

Dual Belt Drive 2800W(1400W*2) 270KV N5055 Motor 83*52mm Wheel Size Power Truck & Front Truck Kit for DIY Electric Skateboard

Components Included:

This is a power truck and front truck kit with dual 5055 motors mounted and four wheels installed.

  • (2) N5055 Motor Mounted (Black, 270KV, 1400W/Motor)
  • (2) Motor Mount (Black)
  • (2) 7.25'' Front Truck and Rear Power Truck (Black)
  • (2) 35T Drive Wheel Pulley (HTD5)  13mm width
  • (2) 13T Motor Pulley (HTD5)  13mm width
  • (2) 250-5M High Torque Timing Belt (HTD5)  12mm width
  • (4pcs) 83mm*52mm 78a Longboard Wheels (Available Colors: Black/Red)

Weight and Size:

  • Kit weight: 3.1kgs
  • Rear Power Truck Weight: 2.17kg
  • 7.25'' is for the truck hanger body.
  • Truck Total Length: 260mm
  • The motor bullet connector size are of 3.6mm*4.8mm*14mm, male.


Additional Required Components:

You will require the following components to complete your build:

  1. Batteries
  2. Battery Charger
  3. Battery Enclosure
  4. Longboard Deck
  5. ESC for dual motors control
  6. Remote
  7. Hardwares

Why choose belts: 1. Replaceable wheels 2. More torque 3. belt drive feels cool 4. belt drive makes noise, cyclists hear it coming so you can pass easier.

Best Recommended Setup

  • WARNING: Do not over tighten the axle nut or you could damage the bearing shields. Tighten just to the point where the wheel can no longer laterally move along the axle.

  • Can I change 83mm wheels to 90mm,97mm and larger wheels size

    Our 35 tooth pulley fits the abec 11 107mm wheels, direct fit no modding to the pulley!

    Every normal abec core should work just fine.

    Other wheels if has same wheel core with our 83mm wheels or abec core(exactly the same core size in thickness) can fit our pulley well too.

    MBS wheels don't fit well, it uses a special stronger core. The MBS 100mm wheels fits just need to modify the pulley a little.







Customers' DIY Photos with our 10S5P Belt kit:

Customer Build with our 38″ Longboard Bamboo Deck and MBS wheels:



Customer Build with ABEC11 wheels:



More photos:





image (1).jpg






  • Diy belt tensioner:

  • 3.jpeg

  • 1.jpeg

  • 2(0).jpeg


Read the Review
by Ryan lancini
5 of 5 Stars!5 of 5 Stars!
Excellent service and product! very fast shipping. HIGHLY RECOMMEND!!

Read the Review
by Jaydubz
5 of 5 Stars!5 of 5 Stars!
Very high build quality. Top-notch components.

Read the Review
by David
5 of 5 Stars!5 of 5 Stars!
Impressed with the quality, wheel pulley is plastic but really strong. Mount and belt guard is metal...

Read the Review
by Scott
5 of 5 Stars!5 of 5 Stars!
Nice kit. Those motors seem very powerful and a good fit for the ESC.

Read the Review
by Stephen
5 of 5 Stars!5 of 5 Stars!
The trucks seems decently made, minus the baseplate, swap it for a paris baseplate, it fits great.

Read the Review
by Matt
5 of 5 Stars!5 of 5 Stars!
It's a nice lightweight kit with lots of power.

DIYEboard's Return & Warranty Policy

DIYEboard, we want you to be completely satisfied with your purchase and we believe in the products which we sell.

All products sold by DIYEboard.com are inspected and tested before and after leaving the manufacturer. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Standard Return Policy

We accept returns or exchanges within 30 days of the original purchase date for cash value refunds.

The returned product must be in unused condition, in it’s original packaging with the original packing slip. A 20%+ restocking fee will be charged on all cash value returns and refunds dependent upon our discretion. Returned orders which received free shipping will be deducted from the original order price.

We cover return shipping on defective items only. The buyer is responsible for covering return shipping costs before a repair or replacement has been completed. All defective items are inspected by our technicians. If the item is not defective the return shipping costs will be charged to the buyer.

Orders that are refused or undelivered as addressed will be charged for any additional shipping fees. NO EXCEPTIONS.

To return or exchange a product, please email us at jason@volansboard.com. You’ll need to mention your order # within your email. A return will require an RMA #(Return Merchandise Authorization #) which you must write on the shipment back to us.

On Sale, Clearance, Boneyard, EPOWER Battery Packs, Electronic Products & Consumable items are not eligible for returns.

General Warranty

All products sold by DIYEboard.com are inspected and tested before and after leaving the factory. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Every complete electric skateboard automatically comes with a 6-month warranty against manufacturing defects.

Every Diyeboard kits, parts and components have a 90-day warranty.

Belts, bearings, wheels, hub motor PU sleeves, bearings, and grip tape are normal wear and tear items and are not covered under warranty. Any amount of water has the potential to damage the board, especially to esc and battery, and water damage is not covered under warranty. Any customization or alterations to the board, kit, mechanical parts, or electronics will void your warranty and likely cause the board or kit to be completely inoperable, so alter at your own risk.

Electronic components have a 60-day warranty. (Includes ESC, Remote, Battery, Battery Chargers, Motors, Hub Motors only).

If a component is defective and/or not correctly made, DIYEboard at it’s sole discretion, will repair, replace and/or pay the buyer for a replacement.

Warranties are non-transferable warranties.

If a component is defective and/or not correctly made, DIYEboard at its sole discretion, will repair, replace and/or pay the buyer for a replacement.

Typical use, normal wear and tear, crash, water damage, modifications, improper use and/or installation are not covered.

60 Day Warranty – Electronics

Electronic components have a 60-day warranty. (Includes Remote, Battery, Battery Chargers, Motors, Hub Motors only)

Most electrical products are tested before shipment and are deemed in working condition before shipment. Due to the nature of assembly and setup, we are not liable or responsible for certain improper installations made by the customer. If it is a practical repair, we are more than happy to assist with repairing, replacing or offering store credit at our discretion.

If the item has been damaged due to user neglect, accident and/or wear and tear the product is not eligible for warranty.

ESC has no warranty unless the additional warranty is purchased.

We do value our customers and under certain circumstances, we may discount a product due to user mistake, incorrect installation. We don’t leave you hanging!

Shipping For Returns

You will be responsible for paying for shipping costs to return the items to us. Shipping costs from your original order are non-refundable.

If you are shipping an item over $100 USD, you should consider an insured and trackable shipping option. We are not liable or accept responsibility for any lost packages which do not arrive at our shop.

Refunds (if applicable)

Returns and Refunds can take up to 4 weeks but typically are resolved much sooner. Once we receive your items, we will notify you if your request has been approved or denied.

If you are approved for a refund, your refund will then be processed through your original payment method within 2-3 business days.

Chargeback Policy

All fraudulent chargebacks are investigated and will be prosecuted to the fullest extent of the law.

Product Listing Disclaimer

Product Listings are updated as often as we can for the every item. Products are improved and upgraded quite frequently and photos may slightly vary. If the item is no longer available under our discretion we will offer a similar or upgraded product.

Acceptance Of This Policy

By purchasing from our website(http://www.diyeboard.com/), you agree to all the policies within our Return & Warranty Policy page.

Customer Videos: See all 0 videos
Customer Images: See all 0 images
Tuesday 03 May, 2016

This product was added to our catalog on Tuesday 03 May, 2016.

DIYEboard.com is your ultimate source for high quality and high performance complete electric skateboard and DIY parts. We carry a wide selection of electric skateboard motor mounts, electric skateboard sensored / sensorless brushless dc belt-drive motors, electric skateboard hub / in-wheel motors, electric skateboard mechanical kits, electric skateboard kits, electric skateboard remote controllers, esc speed controllers, electric skateboard batteries and much much more. DIYEboard.com can help and guide you build your own high performance Electric Skateboard using our lowest factory price Electric Skateboard Parts & Kits. Feel free to send us an email and we are more then happy to help you build your electric skateboard or electric longboard from start to finish.