10S5P 360WH Battery&ESC&Power Truck Kit Dual 90*52mm Hub Motors

Power Kit 10S5P Dual 90*52mm Hub

$529.00  $378.0029

Submit a wholesale Inquiry
76 reward points

Please Choose:


Qty: Unit(s)
Qty Discounts Off Price
* Discounts may vary based on options above

Electric Skateboard 10S5P 36V 10AH 360WH Battery & ESC & Power Truck Kit Dual 90*52mm Hub Motors

We ship correct power cord coodiante with the order shipping address of the country. Customer will get order shipped with correct power cord per order shipping address, e.g, US and Canada order comes with US power cord, Europe order comes with EU power cord, Uk order comes with UK power cord, Australia order comes with AU power cord.

The kit comes with the V2.1 ESC and a 4 speed new version remote so you can control your speed given your circumstances.

From June 1st, all orders that include the esc will come with this New Version 4 Speed Mode Remote Controller RC6.


If any of our customer bought the escs or kits from us, can buy this new remote for upgrade with 4 speed control and better riding control feels.

Video by customers:

DIYEboard 10S5P 90mm hub motor review:







DIYEboard Electric Skateboard Review! 10S5P Hub motor kit


Diyeboard clone loaded vanguard - flex test


Diyeboard 10S5P POWER truck kit 


If you need 83*52 dual hub motors kit, you can order the kit below:


If you need Dual Belt Drive Motor Power Truck & Front Truck Kit, you can order the kit below:


Customers' DIY Photos with our 10S5P 36V 10AH 360WH Belt kit and Hub kit


diyeboard 10s5p(0).png


  • Upgraded V2.1 Dual Hub Motor Sine Wave FOC ESC Speed Controller
  • Easy set up with your own built, plug in and off connectors, easy disassemble the kit and put them back again.
  • Smart battery voltage indicator and power on/off switch.
  • Provide top speeds up to 35-38 kph(22-24 mph) with strong linear acceleration and braking.
  • 10S5P 36V 10AH 360WH battery pack extends the driving range up to 20-30 km.
  • 3-5 hours charge time, Ergonomic 2.4G remote controlling driving modes (3 Speed Mode) and direction reversible.

Components Included:

  • (1) ESC Speed Controller mounted in the battery enclosure( Dual HUB Motors ESC Speed Control )
  • (1) Battery Pack – 10S5P 36V 10AH 360WH 50cells, with BMS built-in the pack.
  • (1) ESC & Battery 2 in 1 Enclosure with Wiring, power on/off switch, battery indicator
  • (1) 2.4G Remote Controller, already paired to the ESC mounted in the enclosure.
  • (1) 10S 42V 2A Battery Charger
  • (2) Dual 90*52mm HUB Motor Mounted on Power Truck (Black/Red, 75KV, 500W/Motor)
  • (2) 90mm*52mm 78a Longboard Wheels (Available Colors: Black/Red) Mounted on 7'' Non-power Front Truck (Black)
  • (1) Hardwares set(bolts used to fix to the deck)


  • Kit Weight – 6.9kg
  • ESC - The speed controller employs sine-wave modulation allowing fine-grained speed control compared to many other competitors.
  • Braking System – Electric Regenerative Braking
  • Throttle Control – Precise Throttle Control 
  • Connectivity – Reliable 2.4ghz Frequency Band
  • Charge Time – 3-5 hours.
  • Batteries – 10S5P 36V 10AH 360WH 50cells, with BMS built-in the battery pack, the BMS protects the battery pack running safely when operating and charging safely when charging. Max voltage is 41.8V, cut off at 31V when power out, the esc will beeping alert when battery at low voltage.
  • 10s5p battery led voltage indicator.jpg
  • The battery led indicator shows the voltage not the percentage, it is within 31v (20%) to 41.3v (100%) .Most of the time it shows around 38v, it means 70% power left.When battery fully charged it shows 41.3v.When it shows 32v you need to charge it immediately. Never never drain the battery, it will shorten the battery life cycles and reduce the battery capacity.The board speed and torque can be different depend on the battery voltage.The higher the voltage, more power more torque and higher speed.
  • Dual HUB Motor 90*52mm 1000W(500W*2) 75KV Power Truck & Front Truck Kit.
  • Ground clearance: 2.2 inches ≈ 5.6 cm   the clearance from center of deck is around 4.5 inches. The enclosure box thinkness is 2.4 inches. So battery enclosure to ground is around 2.2 inches of clearance. The battery and ground Clearance without risers or shock pads is ~1.5 inches. 1.5 inches ≈ 3.8 cm
  • You can use the riser pads to increase the clearance and to absorb riding shocks.
  • http://www.diyeboard.com/longboard-bridge-risers-18mm-thickness-to-increase-deck-height-p-594.html

Remark: This is a nearly done semi complete "Battery & ESC Power Truck and Front Truck Kit" for buliding a electric skateboard longboard, you only need a deck to finish your built.

Dual BLDC Motor Sine Wave FOC ESC Features

  • Voltage: 10S 36V
  • Current: Up to 100A for a few seconds or 50A continous
  • V2.1 ESC PCB Mounting size is 83mm L x 62mm W x 49mm H (Upgraded V2.1 Dual Motor/Hubs Sine Wave FOC ESC Speed Controller)
  • ESC complete size is 74mm long, 53mm wide, 42mm height.
  • Regenerative Braking
  • Sensored or Sensorless operation
  • The starting torque and acceleration is great, comparable to single belt setup. It go up medium hill easily.
  • Remote control: 2.4Ghz Remote Controller

Dual BLDC Motor Sine Wave FOC ESC Benefits

  • Strong, Reliable and Progressive Electric Brakes.
  • Start from a stop with Unsensored or Sensorless Motors as if it was Sensored.
  • Many Safety Features such as Current Control and Temperature Control Features.
  • Sine Wave (FOC) Field Oriented Control allows your electric skateboard to run with barely any motor noise.


1.Less weight:do not need the motor mounts, belts and pulleys,make the hub motors lighter
2.Less maintenance:No motor mounts, belts and/or pulley to replace or adjust.
3.Awesome  appearance:as there is not any transmission device involve,so most people will not even realize that your board is electric.
4.Better startup:can start from a standstill stop and go almost immediately.

How to wire the ESC with the HUB motors:



hub and esc wiring sequence 2.jpg

 Generally the kit is plug and play simple and easy set up, even wrong wiring won't damage esc and motors, so don't worry.

 Please make two sets of wires connect as below color match:
 1. One hub color to color wired with the ESC cables.
 2. Another hub make the wiring color in blue to yellow, yellow to blue , and green to green.
 3. If the motor spin not right check the wiring and sensor wires if they are all well connected and correctly wired. If it still has problems just simply try to switch the wire connection one by one untill it works perfectly.


Remote Operation Instruction:

rc6 remote operation guide.jpg

Remote Pairing Instruction:
1. Turn off both the board and the remote.
2. Turn on the board.
3. Press and hold the power button for 5 to 7 sec until the power button light starts blinking.
Note: "Whilst the power is still on, press the power button on the board again for 5-7 seconds to enable pairing."
4. Turn on the remote.
5. Using a thin stick, quickly press once the recessed binding button on the remote. 
6. If you see the battery gauge light up with the green light on the remote, they're connected. 

Diyeboard's new remote RC6 pairing video with v2.1 ESC https://youtu.be/L9gd1PZqCFY 

Diyeboard's new remote RC6 reset  



Hub motor wiring works both perfectly well with sensor or without sensor cables.
Sensor is extra for hub motors but we don't recommed sensor always plug in the esc as without sensor cable board
 will has more torque output. 
Sensor can make board speed slow and lower the torque but it can make the motor quite when running.

We use sine wave FOC algorithm so sensor is useless, our non-sensored motors works just as same like sensored motors, quick start precise positioning.
We think sensor easy to make problems as vibration and extrem ride will easily make sensor faulty thus motor not working well.


FYI, check below tips for your better understanding our kit working principles.
The ESC beeping alert for underbelow situtations:
1. the battery voltage is too low than 31v, then esc beep alert and shut down the board, as to protect battery over drained.
you need to charge the battery immediately.
2. overheat, continous running makes the esc too hot and it self protection and shut down to cooling it self, you just need to wait several minutes to restart the board.
3. the water get in, don't use the board untill the water get dried totally, you can leave it for 1-2days untill it get dried, or you take the esc out the dry with sunshine or hair drier.
4. the wiring connection for the esc to motor get disconnected or the insulation plastic cover for the bullet connection get touched due to the heat and not insulated well. tape them seperate incase they fuse together and fry the esc.



Read the Review
by William
4 of 5 Stars!4 of 5 Stars!
I've had it for 10 days and finished my built.My first impression when i open the box is good protec...

Read the Review
by charles
5 of 5 Stars!5 of 5 Stars!
it's powerful, the brakes are great and make it a much safer ride, and it's definitely user friendly...

Read the Review
by Riley Howard
5 of 5 Stars!5 of 5 Stars!
The thing is FAST. The top speed range on this thing is PERFECT. You can really feel the torque on t...

Read the Review
by Kyle Nishimura
5 of 5 Stars!5 of 5 Stars!
Everything about it is beautifully done. I am more than impressed.And it is even more fun to ride th...

Read the Review
by Max
5 of 5 Stars!5 of 5 Stars!
A fantastic board with great motors and much more polished ESC performance compared to Meepo. The la...

Read the Review
by Jason
5 of 5 Stars!5 of 5 Stars!
To be honest, it was my first eboard, and ive only road it about 80 miles. I been busy with other th...

DIYEboard's Return & Warranty Policy

DIYEboard, we want you to be completely satisfied with your purchase and we believe in the products which we sell.

All products sold by DIYEboard.com are inspected and tested before and after leaving the manufacturer. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Standard Return Policy

We accept returns or exchanges within 30 days of the original purchase date for cash value refunds.

The returned product must be in unused condition, in it’s original packaging with the original packing slip. A 20%+ restocking fee will be charged on all cash value returns and refunds dependent upon our discretion. Returned orders which received free shipping will be deducted from the original order price.

We cover return shipping on defective items only. The buyer is responsible for covering return shipping costs before a repair or replacement has been completed. All defective items are inspected by our technicians. If the item is not defective the return shipping costs will be charged to the buyer.

Orders that are refused or undelivered as addressed will be charged for any additional shipping fees. NO EXCEPTIONS.

To return or exchange a product, please email us at jason@volansboard.com. You’ll need to mention your order # within your email. A return will require an RMA #(Return Merchandise Authorization #) which you must write on the shipment back to us.

On Sale, Clearance, Boneyard, EPOWER Battery Packs, Electronic Products & Consumable items are not eligible for returns.

General Warranty

All products sold by DIYEboard.com are inspected and tested before and after leaving the factory. Each and every item is tested by our technicians and are guaranteed to be free of material defects and manufacturing faults.

Every complete electric skateboard automatically comes with a 6-month warranty against manufacturing defects.

Every Diyeboard kits, parts and components have a 90-day warranty.

Belts, bearings, wheels, hub motor PU sleeves, bearings, and grip tape are normal wear and tear items and are not covered under warranty. Any amount of water has the potential to damage the board, especially to esc and battery, and water damage is not covered under warranty. Any customization or alterations to the board, kit, mechanical parts, or electronics will void your warranty and likely cause the board or kit to be completely inoperable, so alter at your own risk.

Electronic components have a 60-day warranty. (Includes ESC, Remote, Battery, Battery Chargers, Motors, Hub Motors only).

If a component is defective and/or not correctly made, DIYEboard at it’s sole discretion, will repair, replace and/or pay the buyer for a replacement.

Warranties are non-transferable warranties.

If a component is defective and/or not correctly made, DIYEboard at its sole discretion, will repair, replace and/or pay the buyer for a replacement.

Typical use, normal wear and tear, crash, water damage, modifications, improper use and/or installation are not covered.

60 Day Warranty – Electronics

Electronic components have a 60-day warranty. (Includes Remote, Battery, Battery Chargers, Motors, Hub Motors only)

Most electrical products are tested before shipment and are deemed in working condition before shipment. Due to the nature of assembly and setup, we are not liable or responsible for certain improper installations made by the customer. If it is a practical repair, we are more than happy to assist with repairing, replacing or offering store credit at our discretion.

If the item has been damaged due to user neglect, accident and/or wear and tear the product is not eligible for warranty.

ESC has no warranty unless the additional warranty is purchased.

We do value our customers and under certain circumstances, we may discount a product due to user mistake, incorrect installation. We don’t leave you hanging!

Shipping For Returns

You will be responsible for paying for shipping costs to return the items to us. Shipping costs from your original order are non-refundable.

If you are shipping an item over $100 USD, you should consider an insured and trackable shipping option. We are not liable or accept responsibility for any lost packages which do not arrive at our shop.

Refunds (if applicable)

Returns and Refunds can take up to 4 weeks but typically are resolved much sooner. Once we receive your items, we will notify you if your request has been approved or denied.

If you are approved for a refund, your refund will then be processed through your original payment method within 2-3 business days.

Chargeback Policy

All fraudulent chargebacks are investigated and will be prosecuted to the fullest extent of the law.

Product Listing Disclaimer

Product Listings are updated as often as we can for the every item. Products are improved and upgraded quite frequently and photos may slightly vary. If the item is no longer available under our discretion we will offer a similar or upgraded product.

Acceptance Of This Policy

By purchasing from our website(http://www.diyeboard.com/), you agree to all the policies within our Return & Warranty Policy page.

Customer Videos: See all 0 videos
Customer Images: See all 0 images
Monday 09 October, 2017

This product was added to our catalog on Monday 09 October, 2017.

DIYEboard.com is your ultimate source for high quality and high performance complete electric skateboard and DIY parts. We carry a wide selection of electric skateboard motor mounts, electric skateboard sensored / sensorless brushless dc belt-drive motors, electric skateboard hub / in-wheel motors, electric skateboard mechanical kits, electric skateboard kits, electric skateboard remote controllers, esc speed controllers, electric skateboard batteries and much much more. DIYEboard.com can help and guide you build your own high performance Electric Skateboard using our lowest factory price Electric Skateboard Parts & Kits. Feel free to send us an email and we are more then happy to help you build your electric skateboard or electric longboard from start to finish.